![LittleBee BLHeli 30A ESC 2-6SLipo [ 6 PCS ]](https://www.akekart.in/wp-content/uploads/2025/06/blheli-littlebee-30a-esc-dshot-2-6slipo4-1100x1100-1.webp)
![LittleBee BLHeli 30A ESC 2-6SLipo [ 6 PCS ] - Image 2](https://www.akekart.in/wp-content/uploads/2025/06/IMG_0997-Photoroom.jpg)
![LittleBee BLHeli 30A ESC 2-6SLipo [ 6 PCS ] - Image 3](https://www.akekart.in/wp-content/uploads/2025/06/blheli-littlebee-30a-esc-dshot-2-6slipo2-1100x1100-1.webp)
![LittleBee BLHeli 30A ESC 2-6SLipo [ 6 PCS ] - Image 4](https://www.akekart.in/wp-content/uploads/2025/06/blheli-littlebee-30a-esc-dshot-2-6slipo3-1100x1100w.webp)
INTRODUCTION –
Little Bee 30a ESCs draw 30a of current while offering enormous amperage for even the most demanding performance drones. These ESCs are perfect for high-end or experimental systems, such as those using 6′′ tri-blade props or 5s batteries. When used in conjunction with an appropriate flight controller, these ESCs support one-wire pass-through to enable flashing via clean flying.
Specifications:
- Input: 2-6s LiPoly
- Constant Current: 30A
- Burst Current: 35A
- BEC: No BEC, OPTO only
- Dimensions: 35 x 17 x 3mm(LxWxH)
- Weight: 9g (with power and signal wires)
- Lightweight
- Preflashed with BLHeli-S Firmware
- MCU: SILABS EFM8BB21F16, MCU running at 48MHz
- Dedicated driver chip
- Input: 2-6s LiPoly
- OPTO ESC
- Model: Little Bee 30A-S
- Battery: 6-25.2V (2-6S Lipo)
- Current Rating: 30amp / 35amp burst
- BEC: No (OPTO)
- PCB board: 4 layers blind pole board, 3 oz copper
- Bootloader: BLheli
- Motor Wire: 70mm (20AWG)
- Signal Wire: 120mm
- Firmware: BLHeli_S (Supports Oneshot / Oneshot42 and Multishot / Active Braking – dampened light mode)
Package Includes:
- 1 x LittleBee BLHeli_S 30A ESC
Reviews
There are no reviews yet.